Non-Linting paint brush is the most popular for workers

I believe that people are interested in observing life will know that such a thing, the more the paint brush we use,and this is a normal phenomenon,the more more brush they choose without non-linting. Why?
　　　  
Some workers  use poor quality paint brushes,always lint. When we use this kind of brush paint, the fur of the brush will on the surface of paint. the bristles will often hang on the surface of the paint, the paint film after the stay in the paint, the effect is the paint affected. So, when it should be possible to use the paint brush better quality paint brushes. If it is a new brush, but also pay attention to the hair brushes off easily knock out above it, or floating hair with a lighter to burn it.
　　　
I believe that through the above analysis, we should be able to understand why you want to select lint-free paint brush , only to learn more about some of this knowledge that better purchase and use of paint brushes better.

Reference：www.east-tools.com

Paint brush to paint the issue to the attention of

In home improvement, I believe we can see a worker take paint brush paint it in there, the paint is an important one interior ring prone to some thorny issues, people do nothing. So what kind of paint are prone to the problem then, to solve these problems will definitely give you more handy when interior decorating.

First, paint blistering

First, the bubble punctured, if the water out, that Qiceng or infiltration of moisture behind, a sun drying, water evaporates into steam, putting the top coat of paint from a bubble. At this point, the first hot air gun to remove blistering paint, natural wood drying, then brush on the primer, and finally the entire patch surface re-painting.

If the bubble in the water, it may be cracking wood, with a small amount of air, a sun drying, air expands, patent leather to drum up. Faced with this situation, the first coat of paint scraped blistering, and then filled resin fill cracks, re-painted, or without fillers, in the scrape patent leather, direct coated microporous paint.

Second, cracks

Most of this situation except to use chemical paint remover or hot air gun to remove the paint, then re-painting. If the fracture is not, then can be used wet or dry sandpaper or sanding block wet, paint rubbed off breaking the surface after sanding smooth, putty, brush on the primer, and re-painting.

Third, the paint peeling

May be the reason the surface is too smooth. If the original paint is bright or matte (plus untreated paste paint), the new paint will stick to the surface is not strong. Or may be of wood or metal with rust corrupt, but also because of poor quality and paint peeling.

Small area of peeling paint, first with fine sandpaper, then putty, brush the primer, re-painting. Large areas of peeling paint must scrape off all the re-brush.

In short, the use of paint brush paints, the more knowledge to good use, I believe will achieve good effect.

Reference：www.east-tools.com

Paint brush to reduce the phenomenon of stagnation brush method

The usage of paint brush is not as simple as we think, in order to make full use of paint brush, ways and means are needed, Han Deshi coating said: mastering the correct way to use a brush, brush to minimize the generation of stagnation .

    Many vendors will put correct construction procedure in specification : put the new brush into the water and soak it. Usually 10-15mins.. An ideal method is: 1% detergent dissolved in water (preferably hot)to soak brushes.

     Brush dipped in paint, the length of the bristles in liquid is more than half, one in third is the best. After dipping paint brush tip should touch tank wall a few times to make paintbrushes with paint full but not dripping.

     Paint brush when the line angle relative to the painted surface should be 45 °. On the construction of walls and ceilings, to the vertical line brush, brush longer, touch the wall should be lightly. Painting wood, to the line parallel to the grain brush.

     When brush oil paint , back brush can improve the appearance of the film, but the paint brush, especially semi-gloss or gloss paint, do not back brush. Thick paint brushing requirements and good hiding power, cleanly line brush, in order to achieve good effect.

Source：www.east-tools.com

Select a paint brush and paint techniques

I believe we all know that brushing paintbrush tool is commonly used, according to their shape can be divided into round, flat, and now the emergence of a width larger ceiling brush. Their production of materials can be divided into a stiff brush (bristle, horsetail, etc. made), soft brush (made ​​of wool, etc.). Soft brush mainly refers to the wool row of pens, made ​​with bamboo wear row, each row with 4-24 other. In practice, wood construction with a soft brush, mostly wool brush; but stiff brush is mainly used for brushing and sanding paint finish cleaning.

  So, how to choose a good brushingpaint brush to achieve the desired effect? From a professional perspective, the top grade paint brush bristles should generally be thicker hair Qi, root hard, soft head. for Intuitively, the longer thicker mane, bristles straight, neat dense and elastic, so that easily paint. Therefore , before brushing paint, paint brush should be placed on the 1st emery cloth, sand back and forth along the ground Qi, then dipped in a small amount of paint on an old painted object plane back and forth brush a few times, so that the floating hair, broken hair will fall off, to ensure that the object surface film aesthetics. Brushing lacquer and PU paint must be taken along the wood grain brushing, brushing back and forth is not available, not vertical and horizontal brushing.

www.east-tools.com