Paint the steps and precautions

Paint is necessary in decoration and home decoration engineering , generally we invite the specialized on-site construction painters, but some simple furniture we can also do it yourself. Here we tell you about the steps at home paint brush paint to note what, like yourself friends can learn Oh!

Paint decoration and home decoration engineering may lack the material, generally we invite the specialized on-site construction painters, but some simple furniture we can also do it yourself. Here we tell you about the steps at home paint brush paint to note what, like yourself friends can learn Oh!

What tools you need?

As furniture, paint, we should be ready to paint brushes, masks (reducing gases on the human body injury), thickness sandpaper, scraper, long ruler, plastic buckets and towels.

Steps paint

1, first cleaned ash layer on wood, dirt, etc., to keep the surface clean.

2, grinding grass, wood trim burr grass surfaces, cracks and other defects, with sanded edges neat.

3, the use of transparent putty or oily putty Scraping, after re-fill putty with coarse sandpaper, to be dry putty on the second time, with fine sandpaper.

4, brushing paint, re-fill putty, dry with fine sandpaper to remove surface dust; then went on to paint the second time, after polishing to remove surface dust and sand paper for water mill, oil patch hanging part; first three times the paint can.

Paint Precautions

1, dark paint try not to mix with water, otherwise prone to chromatic aberration; painted the best time to complete, or also prone to chromatic aberration.

2, not in wet weather or winter paint, otherwise it will affect the overall quality of construction, paint is not easy to dry.

3, attention to indoor air cooling, paint, paint polish to dry completely after the other.

4, waiting to dry brush brushing again when soaked in water, promising brush where there are no air bubbles, bubbles immediately if torn.

Paint the steps and precautions to introduce here, we can learn it? If you have any questions you can leave a message at the bottom of the page, we will answer your questions as soon as possible.

Source：www.east-tools.com

Tips on paint brush

with the continuous development of society, the usage of paint brush is wider and wider. If you want to buy and use paint brush,the following knowledge is necessary. 

Classification

Wool brush, bristle brush, elastic wire brush, roller brush, mixed bristle brush.

Production of raw materials

Paint brush with a plastic handle and wooden handle two kinds of handles. Plastic handle is a plastic injection molding. Wooden handle and wooden handle of wood qualities and oiled wooden handle. Paint brush with bristles main material, wool, and nylon imitation bristles, brush auxiliary Arima timber imports iron, small nails, glue.

Purpose and scope

Mainly used paint brush paint brush. Coatings, glues very broad scope of its use in the home improvement, shipbuilding, aerospace, food. Archeology.

Some of the paint brush is essential tips, hope to be able to bring help everyone understand.

Source：www.east-tools.com

Non-Linting paint brush is the most popular for workers

I believe that people are interested in observing life will know that such a thing, the more the paint brush we use,and this is a normal phenomenon,the more more brush they choose without non-linting. Why?
　　　  
Some workers  use poor quality paint brushes,always lint. When we use this kind of brush paint, the fur of the brush will on the surface of paint. the bristles will often hang on the surface of the paint, the paint film after the stay in the paint, the effect is the paint affected. So, when it should be possible to use the paint brush better quality paint brushes. If it is a new brush, but also pay attention to the hair brushes off easily knock out above it, or floating hair with a lighter to burn it.
　　　
I believe that through the above analysis, we should be able to understand why you want to select lint-free paint brush , only to learn more about some of this knowledge that better purchase and use of paint brushes better.

Reference：www.east-tools.com

Paint brush to paint the issue to the attention of

In home improvement, I believe we can see a worker take paint brush paint it in there, the paint is an important one interior ring prone to some thorny issues, people do nothing. So what kind of paint are prone to the problem then, to solve these problems will definitely give you more handy when interior decorating.

First, paint blistering

First, the bubble punctured, if the water out, that Qiceng or infiltration of moisture behind, a sun drying, water evaporates into steam, putting the top coat of paint from a bubble. At this point, the first hot air gun to remove blistering paint, natural wood drying, then brush on the primer, and finally the entire patch surface re-painting.

If the bubble in the water, it may be cracking wood, with a small amount of air, a sun drying, air expands, patent leather to drum up. Faced with this situation, the first coat of paint scraped blistering, and then filled resin fill cracks, re-painted, or without fillers, in the scrape patent leather, direct coated microporous paint.

Second, cracks

Most of this situation except to use chemical paint remover or hot air gun to remove the paint, then re-painting. If the fracture is not, then can be used wet or dry sandpaper or sanding block wet, paint rubbed off breaking the surface after sanding smooth, putty, brush on the primer, and re-painting.

Third, the paint peeling

May be the reason the surface is too smooth. If the original paint is bright or matte (plus untreated paste paint), the new paint will stick to the surface is not strong. Or may be of wood or metal with rust corrupt, but also because of poor quality and paint peeling.

Small area of peeling paint, first with fine sandpaper, then putty, brush the primer, re-painting. Large areas of peeling paint must scrape off all the re-brush.

In short, the use of paint brush paints, the more knowledge to good use, I believe will achieve good effect.

Reference：www.east-tools.com

Paint brush to reduce the phenomenon of stagnation brush method

The usage of paint brush is not as simple as we think, in order to make full use of paint brush, ways and means are needed, Han Deshi coating said: mastering the correct way to use a brush, brush to minimize the generation of stagnation .

    Many vendors will put correct construction procedure in specification : put the new brush into the water and soak it. Usually 10-15mins.. An ideal method is: 1% detergent dissolved in water (preferably hot)to soak brushes.

     Brush dipped in paint, the length of the bristles in liquid is more than half, one in third is the best. After dipping paint brush tip should touch tank wall a few times to make paintbrushes with paint full but not dripping.

     Paint brush when the line angle relative to the painted surface should be 45 °. On the construction of walls and ceilings, to the vertical line brush, brush longer, touch the wall should be lightly. Painting wood, to the line parallel to the grain brush.

     When brush oil paint , back brush can improve the appearance of the film, but the paint brush, especially semi-gloss or gloss paint, do not back brush. Thick paint brushing requirements and good hiding power, cleanly line brush, in order to achieve good effect.

Source：www.east-tools.com

How to use the paint brush in rainy seasons

In rainy season, the most important is to prevent deformation of wood products produced on site. Using a paint brush, too. When a wooden door, window molding but not brush (spray) paint, use a heavy object to its flat crush nearly a week, so that the structure of the door or window is basically stable, so that you can prevent the wood products due to damp deformation.

First, you must brush slowly. And pay attention bubbles. If has,break it.

Second , waiting to dry brush when brushing again, immediately clean it by water, soaked in water;

Third, masks, glasses must be worn, the former can reduce inhalation of harmful gases, which prevents paint eye drops

In a word, as long as do well on these when we are painting in rainy season,the effect will be better.

links:www.east-tools.com

Preparatory work before being painted

Paint with a paint brush, paint brush is not to say you can directly holding the brush, the brush before the substrate is to be processed.

First, there is the oil iron substrates, have to use cotton dipped 90 # gasoline or Chen Hong alkyd thinner to remove oil from the surface of the substrate, and then polished smooth sanding machine or gauze.

Second, rusty metal must use a wire brush, emery cloth, sanding machines and other specialized tools grinding, rust, exposing new substrates.

Third, if the substrate lying acts of injustice, thin coating primer, filled with putty is dry, be dry polished smooth with emery cloth.

Four, the last to be with a clean cotton cloth to wipe clean the substrate, removing rust and dust, to ensure the substrate no oil, no rust, clean and smooth, to ensure that the primer coating adhesion.

In short, good substrate treatment, the effect will certainly be complete paint paintbrushes bring great help.

link:www.east-tools.com