Paint brush to paint the issue to the attention of

In home improvement, I believe we can see a worker take paint brush paint it in there, the paint is an important one interior ring prone to some thorny issues, people do nothing. So what kind of paint are prone to the problem then, to solve these problems will definitely give you more handy when interior decorating.

First, paint blistering

First, the bubble punctured, if the water out, that Qiceng or infiltration of moisture behind, a sun drying, water evaporates into steam, putting the top coat of paint from a bubble. At this point, the first hot air gun to remove blistering paint, natural wood drying, then brush on the primer, and finally the entire patch surface re-painting.

If the bubble in the water, it may be cracking wood, with a small amount of air, a sun drying, air expands, patent leather to drum up. Faced with this situation, the first coat of paint scraped blistering, and then filled resin fill cracks, re-painted, or without fillers, in the scrape patent leather, direct coated microporous paint.

Second, cracks

Most of this situation except to use chemical paint remover or hot air gun to remove the paint, then re-painting. If the fracture is not, then can be used wet or dry sandpaper or sanding block wet, paint rubbed off breaking the surface after sanding smooth, putty, brush on the primer, and re-painting.

Third, the paint peeling

May be the reason the surface is too smooth. If the original paint is bright or matte (plus untreated paste paint), the new paint will stick to the surface is not strong. Or may be of wood or metal with rust corrupt, but also because of poor quality and paint peeling.

Small area of peeling paint, first with fine sandpaper, then putty, brush the primer, re-painting. Large areas of peeling paint must scrape off all the re-brush.

In short, the use of paint brush paints, the more knowledge to good use, I believe will achieve good effect.

Reference：www.east-tools.com